The machine is a single-sided edgebander with fixed working side on the left. It is equipped for edging panels with material in coil (pre-cut strips and solid wood in option with STRIPES PACK and WOOD PACK).

The machine base is made of single steel block with a high degree rigidity giving optimum support for the working units and ensure cleaning and no vibrations. Industrial design.

The feed track consists of 70 mm wide, self-lubri nylon sliders, coated with wear-proof vulcanized rubber with a high coefficient of friction to ensure the maximum panel holding and precision of working.

The conveyor track consists of one flat guide and one round guide both made of ground steel to ensure the straightness of movement and the holding on lateral loadings. Lubrication is automatic.

The top pressure beam is made of thick steel double trapezoidal profile belt. CN height adjustment with display console operator. Panel great stability is also provided in areas of additional pressure rollers positioned at gluing, end trimming and rounding units.

Manual infeed panels system with widely dimensioned guide and over-sized surface to make feeding operations of even large panels

easy.

Transfer device to facilitate extraction of the panels.

The panel support consists of a telescopic shoulder can be extended up to 650 mm (for panels with max width 1200 mm).

The sound proof cabin is coated with noise-reducing material and it is illuminated inside with anti-dazzle neon lights. The soundproof cabin, closed with suction outlets connected to the suction plant is in accordance with the required specifications.

Extraction outlets mounted on the top of the machine with suitable connections for each unit.

The comfortable design of the control panel makes it easy for the operator to use the machine.

Creating programs Just in Time. Possibility of management by means of production list;

Virtual preview of the processed panel with automatic selection of operating units;

Flexible and independent management of each unit and tool without machine vacuum;

Clear and concise diagnostic information for a fast resolution of problems;

Working statistical data: number of worked pieces and meters, of the employed hours etc.;

Management for automatic selection and instantaneous of the magazine edge coil;

Quick selection of the main functions of the main page with PRO EDGE function;

Unit of measurement in mm;

Operator "WinEdge" interface in the following languages: Italian, French,

English, Spanish, German (opt. Portuguese and Russian).

PC Office Operating system: W XP

Screen: 17" TFT

Variable speed feed: 10-30 m/min

Working edging speed for lengthwise processing 30 m/min

Working edging speed for crosswise processing 25 m/min

Fixed overhang panel from the track 35 mm

Melamine thickness 0,4 mm

PVC and ABS 3 mm

Max. edge height 65 mm

Edge cut section max. mm² 135 (3x45)

Max. exceeding edge compared

with the panel thickness 4 mm (2+2)

Min. length coil material 125 mm

Laminate/veneer thin strips thickness max: 1mm

Solid wood thickness: mm 20

min./max. length without rounding unit: 125-3200

min./max. length with rounding unit: 140-3200 mm

min./max. width: 95 – 1200 mm

min./max. length: 125 – 1200 mm

min./max. width: 250 – 3200 mm

min./max. length: 210 – 3200 mm

min./max. width: 125 – 1200 mm

min./max. length: 210 – 1200 mm

min./max. width: 250 – 3200 mm

min./Max panel thickness 10-60 mm

Distance between panels 600 mm

To avoid deposits of glue on the top and bottom surface of the panel.

It is completed with 2 spray-guns fed by two anti-adhesive liquid containers.

A8.15.53 PANEL HEATING LAMPS

Motor power 4+4 KW

Max. section removal according

to the track speed mm² 90

Panel thickness 10-60 mm

Tools installed

For the finishing of the panel to be edged by eliminating possible

imperfections. By this way it assures an excellent gluing surface:

• 2 high frequency motors with automatic time intervention to avoid chipping on the panel;

• Height automatic adjustment allows the correct centering between tool and panel;

• Lateral slide feelers with digital numerical indicators for the shifting;

• Exhaust hood with optimized chip suction flux;

• Timed cleaning blow for the whole panel height

• Inverter.

 

For the gluing on straight profiles of edges in coils with hot melted glue spread on the panel:

• Provided with quick melt system for a fast glue melting;

• Glue pot with anti-adherent treatment to avoid incrustation;

• Fast interchangeability of glue pot;

• Device to measure out the glue;

• Control of the glue temperature on glue pot and on the quick melt system;

• Safety edge presence;

• Handling of the glue spreading roller, of the first pressure roller and of the feed roller by motors synchronized with the speed of the track;

• Guillotine shear for edges in coil;

• "OPTI-CUT" system for the optimized management for precision edge

feeding and rear cut:

• Dragging roller motorized to give the roller the necessary acceleration to

bring the edge to the working position;

• "SMART EDGE" automatic system allows feeding and automatic

changing of two types of edge in coils from a comfortable position of the

without cabinet opening;

• Pressure area with pneumatic independent adjustment of the pressure

and decimal mechanical indicator of position composed by first motorized

big diameter roller, made of Teflon and with four idle rolls (2 straight + 2

conical);

• Automatic cut-off of the glue pot.

Strip storage capacity 200 mm

Glue pot capacity 1,2 KG

Edge height 12-65 mm

Min. ledge length 150 mm

OPTI-CUT device precision with speed up to 30 m/min +/- 2 mm

Glue melting capacity with pre-melting system 8 kg/h

For programmed switch-ON of the pre-heating unit inside the glue tank.

Feeding edges system with 2 stations automatic infeed for material in coil:

• Automatic infeed system of the belt with automatic change-over at

the end of the roll;

• Warning indicating the end of the roll.

 

Maximum roll Ø 800 mm

Max. edge thickness

- in plastic material 3 mm

- in wood material 1 mm

Max. height:

For thin edges up to 1 mm 65 mm

For edges up to 3 mm 45 mm

For the removal of the exceeding edge from the top and bottom of the panel:

• Unit installed on the pressure beam;

• Two motors with pneumatic stroke;

• Front, back feeler with automatic intervention;

• Lateral feelers on linear ball recirculating guides with pneumatic intervention;

• Automatic cut-off for solid wood max. 22 mm thickness or for not orthogonal panels (for example triangle) or for each request of only one side end trimming;

• Automatic and separated blade inclination up to 22 degrees

Speed 12,000 RPM

Motors power 0.3+0.3 KW

• Two overlapped motors provided with quick-release device;

• Top motor connected to the pressure beam for the automatic adjustment according to the thickness panel;

• Large diameter disk-shaped vertical feelers;

• Numerical indicators for the horizontal and vertical shifting of the motors;

• Automatic cut-off;

• Device for 2 position automatic vertical positioning for the rough trimming of thin and medium plastic edges or for the finishing of the veneer or solid wood edge;

• Exhaust hood with optimized ED-SYSTEM chip suction flux.

Motors power 1+1 KW

Max. removing section depending

on track and tool speed mm² 20+20

 

To carry out the function of fine trimming and rounding on straight panels and shaped panels with PVC-ABS edges and thin solid wood with a very high degree of finishing:

• nr.2 interchangeable devices for an easy

interchangeability;

• Horizontal and vertical motor movement with double pneumatic connecting rod system;

• Induction casing "ED-SYSTEM";

• Copying system made with bearing feelers and lateral feeler;

• Horizontal motor movement with numerical positioning indicator;

• Automatic cut-off.

Speed 12000 RPM

Motor power 0.3+0.3 KW

Min.concave profile radius 35 mm

Distance between panel:

15 m/min 600 mm

25 m/min 750 mm

Second set of top & bottom flush trim station added after purchase of new machine. Two .55kw motors tiltable 0-150

For the finishing of radiated PVC/ABS edge:

• Quick- release device made of a tool-holder block + tool which allows the fast and precise interchangeability of the tool;

• Vertical and horizontal shifting devices made of steel grounded bars with recirculating ball bearings;

• Vertical and horizontal feelers of big diameter;

• Numerical indicators for the horizontal shifting;

• Top and bottom independent automatic cut-off of the tolls;

• Interchangeability of the tool;

• Blowers for cleaning and nebulization for each tool;

• Suction of the cuts-off with suitable box for chip;

• 30 mm horizontal automatic cut-off.

It eliminates possible excess of glue on the top and bottom side of the panel:

• Completed with two cutter-tools of Widia

• Vertical feelers

• Two blowers which allows the cutters to be always clean

• Pneumatic intervention to assure the best processing of the starting and the ending side of the panel

• Automatic cut-off

 

To avoid deposits of glue on the cutter tools of the scraping unit in order to improve panel quality and cleaning from glue residue. It includes:

• 2 spraying guns, feed by 2 RIEPE LP 163/93 liquid boxes

For the cleaning and finishing (shining) of plastic edges:

• Two overlapped motors manually with inclination completed with two

cloth brushes

• Top motor connected to the pressure beam for the automatic

adjustment according to the thickness panel

• Manual cut-off

Technical data:

Speed 1500 RPM

Max. horizontal inclination 5 degrees

Motors power 0,29+0,29 KW

Brushes dimension 150 x 50 x 33 mm

B0.90.93 AUTO-TRANSFORMER 95 KVA208-230-460V