New in 2005! Remanufactured in 2012! Cost when new in 2005: $245,657.00 Remanufactured in 2012 by Tagliabue at a cost of $100,000.00
Technical Data
Sanding Units: (2) cross belts
Purpose: veneer and lacquer sanding
Sanding width: 1,900 mm/74"
Work piece thickness: from 3 to 130 mm / 1/8" to 5-1/8"
Work plane height from the floor: 900 mm ± 20 mm / 35" ± 1"
Feed speed: 5-25 m/min. / 16-82 fpm
Fitting
of sanding belt and operating side: right / left side
Terminal: right / left side
Machine cabinet: machine / separate
Paint: RAL gray / 7038
Voltage: 480 volts, 60 cycles, 3 PH
Compressed air consumption: 6 Bar / 87 PSI
Auxiliary: 24 volts
Standard: UL/CE Norm
Computer Control CN 084
Seimens 80C 166 16-bit CPU, 40 Mhz
Visualization with MC LCD displays 240 x 128 pixels
Thermoformed industrial keyboard
RS232 serial line
Bus communication with optical fiber
Memory for maximum 200 sanding programs
Cross Sanding Units (-T-) with Segmented Pressure Beam with computer-controlled
selective pressure adjustment
1st and 2nd Unit 1900 mm
Sanding belt measurements: 150 x 8,510 mm (6" x 335")
Chevron belt size: 140 x 6,350 mm (5.5" x 250")
Sanding belt rotational speeds: 2 and 20 m/sec (6 and 66 ft/sec)
Drive power: 22 kW (30 HP) 6 poles
Machine comes with four sets of rollers and approximately
$10,000 +/- worth of new sandpaper Grits from 100 to 1000 6" x 333 1/2" long.