Auctions! Online
Mereen Johnson 431-DC Dip Chain Gang Rip Saw, 31” Cap.
Taylor Opti-Rip
Giardina Air Drying Tunnels & UV Lacquer Drying Unit
Timesaver 352-5HDBT Constant Passline Top and Bottom Wide Belt Sander
Rees Air Con Dust Collection System (Mfg 2000)
Newman 382 Planing Line (Mfg 2000, Installed 2002)
Equipment no longer required in the continuing operations of Capella Hardwood Flooring.
Brewco Hydraulic Horizontal Resaw

Search All Auctions in Progress

Today's Auctions!

Auction - Capella Hardwood Flooring!
Equipment no longer required in the continuing operations of Capella Hardwood Flooring.



Go To Auction Site

Mereen Johnson 431-DC Dip Chain Gang Rip Saw, 31” Cap. - Vicksburg, MS
Bidding Closes:  4/29/04 @ 2:30 PM EST

*Built 1996 and sold new for $75,000* 31” Cap. Model 431-DC 150HP, 230/460V, 3 Phase, 60 Cycle, Belt Drive Variable Rate of Feed with 5HP Motor, 230/460 Volts Feed Rate: 30 Ft – 150 FPM (2) Pneumatic Infeed Hold Down Rollers (2) Outfeed Pneumatic Hold Down Rollers (1) Saw Sleeve with (5) Blades & Many Spacers (2) Sets of Anti-Kickback fingers in Infeed Side (2) Sets of Anti-Kickback fingers in Outfeed Side Power Raise and Lower on Arbor Load Meter Bijur Mist Lubricator Complete Sound Enclosure for Main Arbor & Motor Machine Hooked Up to 440 Volts Arbor Dolley with Additional Spacers S/N MJ5431



Go To Auction Site

Taylor Opti-Rip - Vicksburg, MS
Bidding Closes:  4/29/04 @ 3:05 PM EST

Mfg 1997 Model 34-0001 (8) Laser Lights 5HP Motor 120 volts This was used to maximize yield by showing the operator where cuts should be made in relation to the defects. Make note: this unit was completely disconnected and removed from the production line We assume it was used in connection with the Mereen Johnson Dip Chain Gang Rip Saw We cannot guarantee that all the parts are there.



Go To Auction Site

Giardina Air Drying Tunnels & UV Lacquer Drying Unit - Vicksburg, MS
Bidding Closes:  4/29/04 @ 3:00 PM EST

GP/Jet 20 GST/UV2 Jet air drying section comprised of jet air tunnel that circulates warm air Air is defused through nozzles at a speed 20 m/sec Heating of the air is done by heat exchanger which can be accomplished using several options (water, steam, oil or electric). Approx/ length of tunnel 120’ Total air volume : 28,600 m3/H Air volume through the jets: 24, 500 m3/H Exhausted air volume: 4100 m/3H Maximum air temperature: 65° c UV Lacquer Drying Unit Comprised of (1) UV Lamp Drive Motor 1.5kw/230/460 volt All bidders should inspect prior to close of auction We cannot guarantee completeness of the feed chain transport and it appears that some PLCs are missing



Go To Auction Site

Timesaver 352-5HDBT Constant Passline Top and Bottom Wide Belt Sander - Vicksburg, MS
Bidding Closes:  4/29/04 @ 2:40 PM EST

s/n 19875 Top Sander: 4 heads, 52” wide capacity, 103” sanding belts Head config: 1st contact roll 40HP 2nd contact 30HP 3rd Head contact 30HP 4th Head platen 40HP All motors 230/460 volts hooked up 480 volts Electronic tracking Cast iron holddowns and rubber rollers throughout 5HP Variable speed feed motor, 230/460 volts (4) Voltage meters Bottom Sander: Model 352-5HDBT 52” wide capacity Contact drum, approx 30HP, 208/230/460 volt 3HP variable speed feed motor Voltage meter Machine is hooked up 480 volts Customer advises us that the machine was reconditioned in 2000 When the machine was removed from the production line, the conveyor belts were lost Any auction buyer will have to buy new conveyor belts.



Go To Auction Site

Rees Air Con Dust Collection System (Mfg 2000) - Vicksburg, MS
Bidding Closes:  4/29/04 @ 4:05 PM EST

Approx 16,000 CFM Capacity Model 8-RA Style 100-10 s/n 00-494 Reverse air unit Filter media area sq footage 1505 Unit has (100) filter bags, 10’ long (8’ diameter) Clark Rotating air lock, Model ER 20-X30 s/n ER2030011247 Main Blower: Air Con Model P-27 Fan s/n CO-404 36” Fan 75HP Motor, 460 volt Blocker and Wallace Pneumatic Pump Package Used to move material from the filter bags out to a discharge area/bin 10HP Chicago Fan Mounted inside (¾HP Bag Shaker/Rotator) 40HP, 230/460 volt (BW40EP6LP, BW6888P, 1000 ICFM-4.5 PSIG-1612RP) With Sutorbilt Positive Displacement Blower The complete dust collection system is mounted on a angle iron construction stand with various ladders and platforms leading to the top, with walk in plemum with access door, with access platform

(3) Lots!

Go To Auction Site

Newman 382 Planing Line (Mfg 2000, Installed 2002) - Vicksburg, MS
Consisting of: Stetson Ross Pineapple Feed Table, Newman Whitney 382 Planer, Rinaldi Chain Decks, Tilt Hoist, Stacker System & Stick Collection System ~ Equipment no longer required in the continuing operations of Capella Hardwood Flooring.

Bidding Closes:  4/29/04 @ 3:00 PM EST

·(Bulk Bid) Rough Mill Planing Line (Mfg 2000, Installed 2002) Consisting of: Newman Whitney 382 Planer, Stetson Ross Pineapple Feed Table, Rinaldi Chain Decks, Tilt Hoist, Stacker System & Stick Collection System
·Newman Whitney Model 382 Hyd. Top & Bottom 30” Wide Roughing Planer
·All Material Handling Equipment Used to Support the Newman 382 Planer



Go To Auction Site

Brewco Hydraulic Horizontal Resaw - Vicksburg, MS
Bidding Closes:  4/29/04 @ 4:00 PM EST

*Approx New Price: $50,000.* Model WB The wheel diameter is 40” x 2" wide, and takes 2 ¼” wide blades Uses a 20'4" long band saw blade Hydraulic hold down roller 10” wide in front of saw blade Hold down roller 10” wide after saw cut S/N BWJ110 12” Wide x 3" High Capacity Designed to handle material up to 12' long. Ideal machine for splitting 8/4 into (2) 4/4 pieces Saw Motor: 10HP, 230/460 volts Resaw fed by a slat bed infeed conveyor 11” wide which feeds through the machine. Hydraulic Pump for feed works, 5HP, 230/460 volts The following conveyor is connected with the resaw Hydraulic canted roller conveyor, 12” x 74” long Hydraulic Infeed Belt Conveyor, 11” x 106” Long Flat Belt Conveyor: 16” wide x 106” Hydraulic Flat Belt Conveyor: 18” wide x 106” Long Hydraulic Flat Belt Conveyor: 48” wide x 60” long New York Blower hooked up to saw for dust collecting, 5HP, 230/460 volts 1050 CFMs Compact GI Fan Model Brewco Bandsaw Blade Sharpener
Search All Auctions
Auction Calendar
Register
Login
My Bid Tracker
Home


Do you have anything you would like to sell via online auction?

Contact One Of Our Online Listing Agents
 

 

footer.jpg (9515 bytes)
 

www.irsAuctions.com



If you wish to be removed from future mailings, please reply to this message with the word "REMOVE" in the subject line.
We will honor your request as soon as possible. Thank you.