|
Lot #
|
Description
|
| 1 |
Weinig GreCon Combipact CP-205/600/1000 Finger Joint Line (2002)
|
| 2 |
Doucet SRX-20-8.5-100-40 20-Section Hydraulic Clamp Carrier
|
| 3 |
Atlas Copco GA307 30hp Rotary Screw Air Compressor
|
| 4 |
Ingersoll Rand SSR-XFE-50 50hp Rotary Screw Air Compressor
|
| 5 |
Hankison SPX HPRP125-115 Air Dryer
|
| 6 |
Lobo 52” 3-Head Planer/Sander
|
| 7 |
Grizzly G9963 (26.5”) Resaw Bandsaw (2004)
|
| 8 |
Murphy Rodgers 100hp Bag House Dust Collector w/ VFD Drive, GreCon Abort Gate, Rotary Air Lock
|
| 9 |
Wood Chip Storage Bin w/ Live Bottom Auger and Incline Outfeed Auger
|
| 10 |
Weima Tiger 400 40hp Horizontal Grinder w/ 16.5ft Vibratory Infeed Conveyors, MDI XR-3000 Metal Detection System and Pendu 15hp Transfer Blower (2004)
|
| 11 |
Mellott 140 14” Scrap Sheer/Chopper w/ 20hp Hydraulic Pump and 20ft Vibratory Infeed Conveyor
|
| 12 |
Bulk Bid of Cameron Automation Quick-Rip Ripsaw Infeed System (2004) and Mereen Johnson Gang Rip Saw - Consisting of Lot #12A and Lot #12B
|
| 12A |
Cameron Automation Quick-Rip Ripsaw Infeed System (2004)
|
| 12B |
Mereen Johnson Gang Rip Saw
|
| 13 |
Oliver No.299 24” Surface Planer w/ Knife Grinder
|
| 14 |
Lateral Transfer Chain Deck
|
| 15 |
AutoRout Inc 5ft x 8ft CNC Router w/ 10hp Vacuum Pump
|
| 16 |
Biesse Rover 322 Pod and Rail CNC Router w/ Becker 3kW Vacuum Pump (1999)
|
| 17 |
Diehl ESL-25 Straight Line Ripsaw
|
| 18 |
Medalist Challoner 527 Double End Tenoner
|
| 19 |
GreCon 1004 Optimizing Saw w/ Infeed and Outfeed Systems
|
| 20 |
Bulk Bid of Mid-Oregon Moulder In-Feed System w/10hp Hydraulic Power Unit and Weinig Profimat 22N 4-Head Moulder - Consisting of Lot #20A and Lot #20B
|
| 20A |
Mid-Oregon Moulder In-Feed System w/10hp Hydraulic Power Unit
|
| 20B |
Weinig Profimat 22N 4-Head Moulder
|
| 21 |
Whirlwind Up-Cut Saw
|
| 22 |
Osama 17” Glue Spreader
|
| 23 |
Gorbel 250lbs Jib Crane w/ Schmalz Vacuum Lift Head
|
| 24 |
Double Jib Crane w/ (1) Schmalz JumboErgo Vacuum Lift, (1) Warn Winch and (2) Jet ½ Ton Trolleys
|
| 25 |
Delta Unisaw w/ BieseMeyer T-Square Rip Fence System and T-Slot Miter Gauge
|
| 26 |
Diehl 4-Head Moulder w/ Teco N3 VFD Drive
|
| 27 |
Bishamon (4,500 Lb. Capacity) Pneumatic Scissor Lift Table w/ Rotary Platform
|
| 28 |
Grizzly G1030Z2P 3hp Twin Bag Dust Collector (2018)
|
| 29 |
Transfer Blower, 25hp
|
| 30 |
Pendu 5hp Transfer Blower
|
| 31 |
Toshiba 100hp, 3ph Electric Motor
|
| 32 |
Hydraulic Pump 2hp and 5hp Electric Motor w/Reduction Gearbox
|
| 33 |
Clamps for Clamp Carrier (Qty of 55)
|
| 34 |
Battery Chargers (2), Electrical Boxes and Various Other Misc Electrical Parts
|
| 35 |
Orgapack OR-T250 Cordless Strapper w/ (2) Strapping Carts
|
| 36 |
Grizzly 3-Wheel Power Feeder w/ Stand
|
| 37 |
New Holland LX485 Skid Steer (Approx. 1,350 Lb. Capacity)
|
| 38 |
Clark CGP-50 10,000lbs Forklift w/ Perkins Diesel Engine, Side Shift, 4ft and 6ft Sets of Forks
|
| 39 |
Nissan KCPH02A25PV (5,000lbs) Propane Forklift
|
| 40 |
Case International 8480 Hay Round Baler
|
| 41 |
Snow Box Plow, 95”
|
| 42 |
Uline H-5440 2200lbs Straddle Stacker (2017)
|
| 43 |
Maren Model14 Saw Dust Bailer
|
| 44 |
Walnut Lumber, 5/4 (Kiln Dried) 1000bd/ft
|
| 45 |
Bulk Bid of 10,500bd/ft of 5/4 Unsurfaced Red Oak Lumber (Kiln Dried, Select or Better) - Consisting of Lot #45A, Lot #45B, Lot #45C, Lot #45D, Lot #45E, Lot #45F, Lot #45G, Lot #45H, Lot #45J and Lot #45K
|
| 45A |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45B |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45C |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45D |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45E |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45F |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45G |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45H |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45J |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 45K |
Unsurfaced Red Oak Lumber, 5/4 (Kiln Dried, Select or Better) 1050 bd/ft
|
| 46 |
Bulk Bid of 2200 bd/ft of 6/4 Unsurfaced Bass Wood (Kiln Dried, Select or Better) - Consisting of Lot #46A and Lot #46B
|
| 46A |
Unsurfaced Bass Wood, 6/4 (Kiln Dried, Select or Better) 1100 bd/ft
|
| 46B |
Unsurfaced Bass Wood, 6/4 (Kiln Dried, Select or Better) 1100 bd/ft
|
| 47 |
Unsurfaced Hard Maple, 5/4 (Kiln Dried, 1 Common and 2 Common) 1300bd/ft
|
| 48 |
Surfaced and Unsurfaced Soft Maple Lumber, 8/4 and 7/4 (Kiln Dried) 1775bd/ft
|
| 49 |
Hard Maple and Red Oak Lumber (Kiln Dried) 250bd/ft
|
| 50 |
Ripped and Defected Hard Maple - 1100bd/ft
|
| 51 |
Ripped and Defected Hard Maple - 950bd/ft
|
| 52 |
Ripped Hard Maple- 850bd/ft
|
| 53 |
Ripped Hard Maple - 1025 bd/ft
|
| 54 |
Ripped Hard Maple - 450bd/ft
|
| 55 |
Soft Maple Finger Joint Butcher Block Material - 370bd/ft
|
| 56 |
Ripped Walnut and Misc Finger Joint Butcher Block Material - 750bd/ft
|
| 57 |
Ripped Hard Maple - 280bd/ft
|
| 58 |
Ripped Red Oak - 620bd/ft
|
| 59 |
Ripped Hard Maple - 400bd/ft
|
| 60 |
Ripped Hard Maple - 775bd/ft
|
| 61 |
Assortment of Hard Maple Lumber, Ripped Red Oak and Walnut as well as Finger Joint Walnut Butcher Block Stock
|
| 62 |
Defected Oak Rips and Assortment of Walnut, Red Oak and Maple Finger Joint Butcher Block Material
|
| 63 |
Ripped Hard Maple - 650bd/ft
|
| 64 |
Ripped Red Oak and Cherry -375bd/ft
|
| 65 |
Aspen Lumber and Ripped Hard Maple - 275bd/ft
|
| 66 |
Ripped Hard Maple (Short Stock) - Approx. 1800bd/ft
|
| 67 |
Assortment of Tongue and Groove Single Side Surfaced Pine Siding
|
| 68 |
Assortment of Cardboard Boxes and Cardboard Pads
|
| 69 |
(2) Lumber Storage Racks and (7) Flat Rolling Carts
|
| 70 |
Sweed 400AD Scrap Chopper
|
| 71 |
Scissor Lift Table, 4ft x 8ft
|
| 72 |
GEW 75kVa Transformer
|
| 73 |
Worldwide and Ironhorse Reduction Gearboxes (9 Pcs)
|
| 74 |
Assortment of Pneumatic Cylinders, Solinoids and Fittings and Misc Chains and Drive Sprockets
|
| 75 |
Clipper Microlacer Belt Lacer w/ Assortment of Belt Fasteners
|
| 76 |
Hydraulic Drive Motors (3) and Assortment of Hydraulic Lines
|
| 77 |
Grizzly G8749 Benchtop Drum/Flap Sander
|
| 78 |
Electric Pallet Jack, 24v
|
| 79 |
Belt Conveyor, 24ft (no motor)
|
| 80 |
Roller Top Gravity Conveyor, 10ft
|
| 81 |
Folding Wire Basket w/ Assortment Of Ripped Hard Maple Stock
|
| 82 |
Interior Spiral Dust Piping
|
| 83 |
High Lift / Scissor Lift 2200lbs Pallet Jack
|
| 84 |
High Lift / Scissor Lift 2200lbs Pallet Jack
|
| 85 |
High Lift / Scissor Lift 2200lbs Pallet Jack
|
