Make An Offer!
The system consists
of:
(2) Donaldson Torit
Cyclone Baghouse Dust Collector Units
Model 570RFW10
Year of the system
2007
Each collector has
(570) Filter bags 10 ft long
7,415 sq ft of filter
area
Each rated for:
50,470 CFM at 5:1
filter ratio
74,150 CFM at 10:1
filter ratio
112,225 CFM at 15:1
filter ratio
Overall collector
height 46'-5" (553.5")
Cyclone diameter
15'-6" (188")
Dust collector
weight 40,049 lbs
Heavy duty bolt
together cyclone sectional construction
Blow out explosion
cyclone panels
Bolt-together dust
collector stand with side safety ladder and top catwalk platforms
Top walk in filter
room for ease of changing filters
Rotary top filter
cleaning system
20 Hp, 230/460 volt
three phase filter cleaning blower fan
Bottom mounted
20" rotary airlock valve
Outside stand
mounted automatic filter cleaning controls and lockout safety switches
Each collector has
Clarke's back draft damper valves on inlet pipes to cyclone
The dampers are
designed to automatically activate in the event of an explosion to prevent the
backflow of fire laden air
Pull through
collector design with fan on clean air side of the filter
Each collector has
(1) Twin City main blower fan
350 Hp (260 Kw), 460
volt three phase fan drive motor, 387 amps, 1788 rpm
52" diameter
fan inlet pipe size(1) AbsoluteAire air make up unit Each collector has
(1) AbsoluteAire air make up unit mounted after blower fan
460 volt three
phase, 60 hzGrecon abort gate system Each collector has Grecon abort gate system in between air make up unit and return air pipe to
building
(1) Square D model 6
master motor control station
Please note that the
controls for both systems are located in this cabinet
Pull out plugs for
main fans, cleaning heads, airlocks and sweeper arms
Each system has separate
Square D E-Flex adjustable speed drive/soft starter for main blower fan control
Each system has (1)
Ecogate Power Master control cabinets
Ecogate controls
have Yasakawa VFD main motor speed drives and controls for blast gates in the
system
(1) Ecogate master
PLC control with color touch screen display
(Please note that
there are NO blast gates included with this lot)
(1) Drag chain
conveyor under both collectors with incline to semi trailer loading system
station
(1) Steel frame semi-trailer
loading station with (2) docks
Includes:
(1) Heavy duty steel
stand with (2) loading stations
Bolt together stand
design
(1) Top mounted dust
collection cyclone separator with bottom rotary air lock valve
Approximate 48"
diameter cyclone
12" rotary air
lock with 2 hp, 230/460 volt three phase drive
Please note that
there are NO blower fans included with this lot
Overall stand size
28' wide x 142" deep x 182" high
(1) Steel three wall
loading station enclosure
Overall enclosure
size 30' deep x 50' wide x 193" high walls
Heavy duty I-beam
wall support beams with screw together sheet metal wall panels
(2) 36" wide
side access doors at the rear of the enclosure
Rear mounted
electrical control room
Abco Automation
loading station control panel
Flip switch station
controls
Please note that the
system includes the pipe from the first supported location to the station
cyclone
Steel bolt together
frame stand
ABCO flip switch
master loading station control panel
(The control panel
is located in the building behind the loading station)
(1) Flamex spark
detection and fire suppression system
Model FMZ-4100
(32) zone capable
with expansion slots
Wall mounted control
cabinet with electronic digital display and soft touch keys
Assorted spark
detection sensors mounted on interior pipe
Includes all pipe
connected to the system up to the building side wall and the interior return
air defusers
(Dust collector
plant numbers 6 & 7)