• Plant Closures!
• Industrial Assets!
• Industrial Auctions!
• Leasing Repossessions!

Giben KG-468J Edgebander (2018)
Giben KG-468J Edgebander (2018)

Giben KG-468JKS Edgebander w/ Pre-Mill and Corner Rounding (2018)

Watch on YouTube

New in 2018!

Standard configuration Motorized regulation of the beam.
Speed 10-15-20 m/min. Chain drag with manual lubrication of the sliding guides.
Support bar at 700 mm. extractable.

Maximum panel height 60 mm.
Maximum edge thickness 3 mm.
Minimum panel length 120 mm.
Minimum panel width 80 mm.
Square Fence Guide, length 400 mm.
In tempered iron steel. Feeding gate for correct panel gap.
PLC Touch Screen for the adjustment of groups Control of each unit on/off and speed as well as glue temp & diagnostics.
2 positions set up from control unit for quick change over (ex. 3 mm pvc to 0.4 mm pvc).

Equipped with:
Coil Feeding Table
Station 1: (2) Pre-Mill Heads
Station 2: Glue up Press Section
Station 3: End Trim
Station 4: Top & Bottom Rough Trim
Station 5: Top & Bottom Fine Trim
Station 6: (2) Station Corner Rounding
Station 7: Top & Bottom Scraping
Station 8: Top & Bottom Flat Scraping
Station 9: Grooving/Hogging Head for opening a groove on panels
Station 10: Top & Bottom Buffing Head

Pre-Milling Diamond cutter 35 mm. height (upgrade to 65 mm at additional cost). 150 mm external diameter. 30 mm internal with time entrance. 1. counter-clockwise / 2. clockwise. 2 motors (2.2 kW) 12,000 min-1 200 Hz.

Glue Pot 2 liter capacity, roller height 65 mm.
2 resistors: one on roller 250 W and the second in a glue tank 1,500 W.
Temperature sensor roller with quick change glue pot (top pot capacity 5KG, lower pot capacity 2KG)

Cutting Head 2 motors (0.35 kW) 12,000 min-1 200 Hz. Two position pneumatic adjustment (straight and angle).

Top & Bottom Fine Trimming Group 2 motors (0.7 kW) 18,000 min -1 300Hz each motor is equipped with manual groups adjustment.

Corner rounding / trimming Device Upper and lower trimming of edge applied onto straight panels with upper and lower rounding of edge applied onto post-formed panels.
Maximum panel height 60 mm.

2 motors (0.7 kW) 18,000 min. - 1 300 Hz Profile Scraper/Buff Removal of material to clean the profile shape from possible imperfections from the trimmer tooling.

Grooving motor at the end is capable of opening a groove on the panels
(This unique feature is added by the customer at the time of purchase in 2018)

Serial #1468161000502



Or for information on this machine please contact Ian Liebgott 717-849-5042 

Available by Private Negotiation Only

Available by Private Negotiation Only

All items are subject to prior sale.