Technical
Specifications:
Edgeband thickness: COILS 0.4 – 3 mm ( 1 /64 – 1 /8 in) STRIPS 0.4 – 6 mm ( 1
/64 – 1 /4 in)
Edgeband length: STRIPS 229 mm (9 in)
Workpiece length: MIN 140 mm (5 1 /2 in)
Workpiece width: MIN 70 mm (2 3 /4 in)
Workpiece thickness: 8 – 60 mm ( 5 /16 – 2 3 /8 in)
Feed speed: 11 m/min (36 ft/min)
Pressure section: first roller driven, two (2) rollers idle
Joint trimming unit (2x): 2.2 kW (3 HP) each / 12,000 rpm
End trimming unit (2x): 0.18 kW (1 /4 HP) each / 12,000 rpm
Fine trimming unit (2x): 0.27 kW (1 /3 HP) each / 12,000 rpm
Contour trimming unit (1x): 0.35 kW (1 /2 HP) / 12,000 rpm MIN workpiece
length: 250 mm
Total power required: 15 kW
Amperage: @ 230V 42 amps @ 460V 21 amps
Machine length: 4,773 mm (15 1 /2 ft)
Machine width: 1,300 mm (4 1 /2 ft) working height: 950 mm (37 1 /2 in)
Total height (with hoods open): 2,180 mm (7 ft)
Machine weight: 1,500 kg (3,300 lb)
Electrical connection: 208/230/440/480V / 3-phase / 60 Hz
Dust extraction: (1x) 120 mm, (4x) 80 mm, (1x) 100 mm, 2,035 CFM
Compressed air: 15 CFM, 6 bar (87 PSI)
EasyTouch Program Control
Touchscreen operation with 7" graphic display
Joint Trimming Unit
Pre-trimming of the workpiece edge prior to gluing
Two (2) motors, 3 HP each, 12,000 rpm
Automatic Magazine for Strip and Coil Feeding
Large coil table (800 mm diameter) with built-in rollers to allow for 3 mm PVC
coils
Edge strip capacity: 0.4 – 6 mm
QA-65 N Hot Melt Gluing System
Sound Cover
Equipped with two (2) independent openings
Double-Motor End Trimming Unit
Straight/chamfer end trim unit equipped with two (2) 0.18 kW (1 /4 HP) 12,000
rpm motors
Fine Trimming Unit
Equipped with two (2) 0.27 kW (1 /3 HP) 12,000 rpm trimming motors
Single-Motor Contour Trimming Unit
Corner rounding of thick PVC edging material
Quick-Change Profile Scraping Unit
Scraping of roughly trimmed thick PVC edges
Finish Scraping Unit
Flat knives remove any unwanted material from the trimmed / scraped edge
Top and Bottom Buffing Unit
Top and bottom buffing motors for finishing of longitudinal edges
Two (2) 2,800 rpm polishing motors
