Asset no longer required for continuing operations of Weber School District Maintenance. Auction includes: Homag KDF 230C High Flex 1230 FC Auto Edgebander (2018)
West Haven, UT
Closing Online: June 22nd
Asset no longer required for continuing operations of Weber School District Maintenance. Auction includes: Homag KDF 230C High Flex 1230 FC Auto Edgebander (2018)
Auctioneer's Note: Machine purchased New in 2018 for approximately $74,000+-. This Machine is Located at Weber School District and as with all School Machinery Looks to Have Light Use!
New in 2018!
EasyTouch Program Control Touchscreen operation with 7" graphic display
Station #1: Joint Trimming Unit (Pre-milling) Pre-trimming of the workpiece edge prior to gluing Two (2) motors, 3 HP each, 12,000 RPM
Station #2: Automatic Magazine for Strip and Coil Feeding Large coil table (800 mm diameter) with built-in rollers to allow for 3 mm PVC coils Edge strip capacity: 0.4 – 6 mm
Station #3: QA-65 N Hot Melt Gluing System
Station #4: Double-Motor End Trimming Unit Straight/chamfer end trim unit equipped with two (2) 0.18 kW (1/4 HP) 12,000 RPM motors
Station #5: Fine Trimming Unit Equipped with two (2) 0.27 kW (1/3 HP) 12,000 RPM trimming motors
Station #6: Single-Motor Contour Trimming Unit (Corner Rounding) Corner rounding of thick PVC edging material
Station #7: Quick-Change Profile Scraping Unit
Station #8: Finish Scraping Unit
Station #9: Top and Bottom Buffing Unit Top and bottom buffing motors for finishing of longitudinal edges Two (2) 2,800 RPM polishing motors
Sound Enclosure
Technical Specifications
Edgeband thickness: Coils 0.4 – 3 mm (1/64 x 1/8 in.) Edgeband thickness: Strips 0.4 – 6 mm (1/64 – 1/4 in.) Edgeband length: Strips 229 mm (9 in.) Workpiece length: Min. 140 mm (5-1/2 in.) Workpiece width: Min. 70 mm (2-3/4 in.) Workpiece thickness: 8 – 60 mm (5/16 – 2-3/8 in.) Feed speed: 11 m/min. (36 ft/min.) Pressure section: First roller driven, two (2) rollers idle Joint trimming unit (2x): 2.2 kW (3 HP) each / 12,000 RPM End trimming unit (2x): 0.18 kW (1/4 HP) each / 12,000 RPM Fine trimming unit (2x): 0.27 kW (1/3 HP) each / 12,000 RPM Contour trimming unit (1x): 0.35 kW (1/2 HP) / 12,000 RPM Contour trimming unit min. workpiece length: 250 mm Total power required: 15 kW Amperage: @ 230V – 42 amps, @ 460V – 21 amps Machine length: 4,773 mm (15-1/2 Ft) Machine width: 1,300 mm (4-1/2 Ft) Working height: 950 mm (37-1/2 in.) Total height (with hoods open): 2,180 mm (7 Ft) Machine weight: 1,500 kg (3,300 lbs) Electrical connection: 208/230/440/480V, 3 phase, 60 hZ Dust extraction: (1x) 120 mm, (3x) 80 mm, (1x) 100 mm, 2,035 cfm Compressed air: 15 cfm, 6 bar (87 psi)