(Lot 28) Bridgewood BW562M (5-Head) Moulder
Specs:
220V, 3 phase, 15 HP7” x 27” infeed table
First Head: Bottom spindle assembly: 15 HP (Motor is shared between top head & second bottom head)
Second Head: Top spindle assembly: 15 HP (Motor is shared with the first & second bottom heads)
Third Head: Left side spindle assembly: 5 HP (Motor is shared with right head spindle)
Fourth Head: Right side spindle assembly: 5 HP (Motor is shared with left head spindle)
Fifth Head: 2nd bottom spindle assembly: 15 HP (Motor is shared between 1st bottom head & top head)
Approx. capacity: 5-1/2” x 2”
220V, 3 phase, 15 HP
7” x 27” infeed table
First Head: Bottom spindle assembly: 15 HP (Motor is shared between top head & second bottom head)
Second Head: Top spindle assembly: 15 HP (Motor is shared with the first & second bottom heads)
Third Head: Left side spindle assembly: 5 HP (Motor is shared with right head spindle)
Fourth Head: Right side spindle assembly: 5 HP (Motor is shared with left head spindle)
Fifth Head: 2nd bottom spindle assembly: 15 HP (Motor is shared between 1st bottom head & top head)
Approx. capacity: 5-1/2” x 2”
7” x 27” infeed table
First Head: Bottom spindle assembly: 15 HP (Motor is shared between top head & second bottom head)
Second Head: Top spindle assembly: 15 HP (Motor is shared with the first & second bottom heads)
Third Head: Left side spindle assembly: 5 HP (Motor is shared with right head spindle)
Fourth Head: Right side spindle assembly: 5 HP (Motor is shared with left head spindle)
Fifth Head: 2nd bottom spindle assembly: 15 HP (Motor is shared between 1st bottom head & top head)
Approx. capacity: 5-1/2” x 2”
Email This Lot To A Friend