(Lot 4) Hercules 22 (22") Metal Shaper
Specs:
NOTE: Seller will assist with loading; however, the location only has dock level access. There are NO ground level doors at the plant.____________________
Model 22
5 Hp, 220 volt three phase drive motor
22" stroke of shaper ram
Tilting tool holder head (0 to 90 degree left/right)
12-1/4" wide x 20-1/4" long x 12-1/2" high T-slotted work table
Manual adjustment with automatic control of table side to side movement
Variable feed speeds
Push button motor controls
The machine is on (1) pallet
NOTE: Seller will assist with loading; however, the location only has dock level access. There are NO ground level doors at the plant.
____________________
Model 22
5 Hp, 220 volt three phase drive motor
22" stroke of shaper ram
Tilting tool holder head (0 to 90 degree left/right)
12-1/4" wide x 20-1/4" long x 12-1/2" high T-slotted work table
Manual adjustment with automatic control of table side to side movement
Variable feed speeds
Push button motor controls
The machine is on (1) pallet
____________________
Model 22
5 Hp, 220 volt three phase drive motor
22" stroke of shaper ram
Tilting tool holder head (0 to 90 degree left/right)
12-1/4" wide x 20-1/4" long x 12-1/2" high T-slotted work table
Manual adjustment with automatic control of table side to side movement
Variable feed speeds
Push button motor controls
The machine is on (1) pallet
Email This Lot To A Friend