Length - Feed Table Up, Tongue In: 150 in

Length - Table Down

Tongue Extended: 198 in

Width: 66.5 in

Height: 101 in

Weight - Engine Option One: 4,680 lbs.

Tongue Weight - Engine Option One: 520 lbs.

Sound Power: 119 dB

Make and Model: Deutz G2.9 L4

Number of Cylinders: 4

Gross Horsepower (Maximum): 72.4 hp

Torque (Max): 154 ft-lb

Fuel Tank Capacity: 20 gal

Max Fuel Consumption: 4 gph

Fuel Type: Unleaded and E10 gasoline

Air Cleaner: 2-stage dry with safety element

Oil Filter: Spin-on

Recommended Oil: 10W30

Oil Volume with Filter: 8 qt

Maximum Angle of Continuous Operation: 30 deg

Cooling Medium: Liquid cooled

Coolant Capacity (Engine and Radiator): 5.5 gal

Alternator: 95 amps

Fan: 18.75-in suction

Clutch Type: Clutchless PTO

Clutch Drive Engagement: Belt tensioner

Feed Roller Orientation: Horizontal

Number of Feed Rollers: 1

Feed Roller Clamp Load: 350 lbs.

Feed Roller Minimum Distance to Drum: 1 in

Feed Roller Dimension: 20 " x 17 " (50.8 cm x 43.2 cm)

Number of Knives: 2

Weight of Feed Roller: 400 lbs

Number of Feed Roller Motors: 1

Motor Displacement: 28.3

Motor Manufacturer: White

Feed Speed: 118 ft/min

Infeed Table Width: 52 in

Infeed Table Length: 32 in

Infeed Hopper Height: 12 in

Infeed Throat Capacity: 12 " x 17.5 " (30.5 cm x 43.2 cm)

Pinch Point - Distance to End of Feed Table: 66.5 in

Distance from Feed Table to Ground: 26 in

Infeed Table Material Thickness: .2 in

Bottom Feed Stop Bar: Standard

Bottom Feed Stop Bar Diameter: 2 in

Bottom Feed Stop Bar Material Thickness: 11 GA

Actuation Force (BFSB): 34 lbs.

Normal Sensitivity: 22 deg

Reduced Sensitivity: 12 deg

Reset Method: Green hold-to-run button

Four Position Feed Control Bar: Standard

Positions: 4: E-stop, forward, neutral, and reverse

Actuation Force: 34 lbs.

Green Hold to Run Button: Standard

Material Capacity: 12 in

Thickness: 20 in

Diameter: 20 in

Speed: 2220 rpm

Weight With Shaft: 460 lbs.

Safety Lock - Number of Positions: 2

Number of Knives: 2

Knife Thickness:  .6 in

Material: A8 chipper steel

Useable Edges: 2

Knife Size: 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm)

Number of Bolts/Knife: 4

Replaceable Threaded Knife Block: Yes

Number of Paddles: 5

Fixture Method: Weld-on

Air Flow: 580 cfm

Bedknife Size: 3.5 " x 17.3 " (8.9 cm x 43.8 cm)

Bedknife Thickness: 1 in

Bedknife Material: 1018

Bedknife - Number of Useable Edges: 4

Number of Bearings: 2

Bore: 2.4 in

Type: Spherical rollers

Manufacturer: Linkbelt

Dynamic Capacity: 31,400 lbs.

Static Capacity: 53,500 lbs.

Belt Idler/Tensioner: Yes

Belt Type: 5V

Chute Height: 101 in

Chute Rotation Angle: 270 deg

Rotation Type: Manual rotate with pin lock

Rotational Lock: Yes

Tank capacity: 7 gal

Recommended Oil Type: Vermeer VMF

System Type: Open center

Filtration Method: 10 micron return; 100 micron suction

Pump Flow at Maximum RPM: 3 gpm

System relief pressure: 2,500 psi

Flow Control: No

Directional Control: Yes

Oil Cooler: No

System Voltage: 12 volt

Battery: Group 24; 580 CCA

Standard Gauges: Fuel and MFD

Deluxe Gauges: Standard

Switches: Droop, EcoIdle, and Sensitivity

Controller: Vermeer ACS

Display: In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road.

Shutdown System: High temp, low pressure

Radio Remote Control: No

Frame Description: 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness

Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm)

Tongue Extension: Extendable 24" (61 cm) at 12" (30.5 cm) increments

Hitch Type: Pintle

Fender Description: Bolt-on steel

Axle/Suspension: Torsion

Type - Option One: Rubber torsional

Manufacturer - Option One: Dexter

Capacity - Option One: 5,200 lb. (2358.7 kg)

Tires - Option One: ST235/80/R16 Load Range E

Wheels - Option One: 16 " x 6 " (40.6 cm x 15.2 cm)

Axle/Suspension - Option Two: Torsion

Type - Option Two: Rubber torsional

Manufacturer - Option Two: Dexter

Capacity - Option Two: 7,000 lb. (3175.2 kg)

Tires - Option Two: ST235/80R16 Load Range E

Wheels - Option Two: 16 " x 6 " (40.6 cm x 15.2 cm)

Brake Type: Standard electric or optional hydraulic

Trailer Light Type: LED